As a first step, please check that the box of your Shadow Ghost contains all the items listed below:
. Shadow Ghost
. The power box
. 4 Power supply sockets per country
. HDMI 2.0 cable
. Operating instructions
Once this check is done, install your Shadow Ghost and plug the power cord into the dedicated connector while using the correct power outlet for your country.
Connect the HDMI 2.0 cable to the Shadow Ghost and connect it to your monitor or TV screen.
You need to connect your Shadow Ghost using wifi before connecting it with an ethernet cable! This is only for the first update and you need not connect over Wi-Fi for later updates.
Then connect your ethernet cable and connect it directly to your internet box. To find out how to connect your Shadow Ghost to Wifi, please refer to this article
Finally, connect your devices. If one or more of your devices are Bluetooth, please refer to this article.
Once you've plugged everything in, you can turn on your Shadow Ghost by pressing the Shadow Ghost's power button for 3 seconds until the red LED below lights up to indicate power up.
Once the startup is done, an update will start and Shadow Ghost is likely to restart several times.
When your Shadow Ghost has started, now is the time to configure the region and language you want to use. First select the language of your choice.
Then select the keyboard layout that suits you best for your hardware and devices.
You are now ready to configure your Shadow Ghost.
You may also want to check out our tips on how to use Shadow Ghost
Still have questions after reading this article? Contact us for assistance!